|
Post by frogbear on Jan 6, 2009 14:45:32 GMT 10
WOW
Just WOW!
|
|
|
Post by Cthulhu_gump on Jan 11, 2009 20:04:36 GMT 10
Ok, some more pics of Warhound #3 as it nears completion, the guns were attached and a bit more work was don to them to make them look a little bit more Chaosish. Then began the task of doing the bases. This is the final step Yippe! Warhound 1 Warhound 2 Warhound 3
|
|
|
Post by Cthulhu_gump on Feb 4, 2009 14:28:38 GMT 10
Conversion of A Imperator TitanStep1: - Feet and legs • Glue up Feet and leg parts. • Attach Main spikes (the big spikes come from the Chaos 40K Terminator sprue), these were fitted at the top of the Shins. • Attach 8 smaller spikes from the Chaos Vehicle Spikey bits sprue, 4 on each side. • Cut down a 4K CSM Shoulder pad to get the Chaos symbol fr the frnt of the shins. • Putty around he Chaos symbol, making sure that the windows underneath are covered as well. Then build up the supports around the windows to make it look a little bit different. • Putty up around the large spikes at the top side of the shins.
|
|
|
Post by Cthulhu_gump on Feb 4, 2009 14:35:31 GMT 10
Step 2: - Body• Glue body parts together. • Remove the Imperial Eagle’s wings from the underside of the building, attach the Large spikes from the old 40K Chaos Vehicle sprues as is son in the 2nd picture. These spikes come out Horizontally from the front of the torso (on either side of the skull). • Attach smaller spikes that come from the new 40K Building sprues. These ones go vertically in front of the door openings in front of the building. • Putty the roof top and attach the 2 skulls from the 40K CSM shoulder pads as is shown in the picture. • Putty under the arms the spikes. • I decided to make the rear of the body match with the front and put two of the big spikes on the tail of the body.
|
|
|
Post by Cthulhu_gump on Feb 4, 2009 14:49:53 GMT 10
|
|
|
Post by cal001 on Feb 4, 2009 19:36:30 GMT 10
Looking very cool Drew, plenty of additional ideas there that I can put into my second one.
Cheers Aaron
|
|
|
Post by onyx on Feb 4, 2009 21:44:56 GMT 10
Second one...!? Lovely stuff Drew. These are going to be real works of art when finished. Steve.
|
|
Snap
Full Member
Why?
Posts: 122
|
Post by Snap on Feb 5, 2009 8:25:51 GMT 10
You've been a busy boy Drew - it's great to see your ideas come to life mate...
Very nice work with the sculpting too, particularly Warhound 3's trunk section. Got any name's for them yet?
|
|
|
Post by marklogue on Feb 7, 2009 10:35:32 GMT 10
That looks cooolidy cool cool.
Nice conversion ideas, thanks for the step by step.
|
|
|
Post by Cthulhu_gump on Feb 17, 2009 8:52:16 GMT 10
Thanks guys , Im really excited about how he's going!
|
|
|
Post by Cthulhu_gump on Feb 17, 2009 9:09:10 GMT 10
Step 4 - Left arm• Started once again with glueing the left gun arm together and making sure that it fit into the cavity in the left side of the shoulder. • The next step was to add some spikes around the outside of the head of the gun, the pikes came off the trophy racks from the 40K Chaos Rhino’s. 12 spikes were put around it. • The next step as to add the close combat arms/appendage’s to the side. These came from the 40K Chaos spawn sprues. • The body attachment point or the gun was then moved slightly, I cut this off and sliced the solid part of the shoulder attachment point away, replaced the pin that goes into the body, and now the gun faced slightly off to the side. • The final step was to add the putty to the gun, around where the CC weapons had come out from.
|
|
|
Post by cal001 on Feb 17, 2009 19:57:43 GMT 10
Very nice Drew, very nice indeed. Looks like you are leaning towards the Lord of decay there mate.
Cheers Aaron
|
|
|
Post by Cthulhu_gump on Feb 17, 2009 20:53:36 GMT 10
...Looks like you are leaning towards the Lord of decay there mate. ;D Always dude.
|
|
|
Post by marklogue on Feb 17, 2009 21:29:52 GMT 10
Some seriously impressive conversions are happening here. Surely you guys all want to move to Geraldton and make it the Epic center of the universe!
|
|
|
Post by Cthulhu_gump on Feb 21, 2009 13:53:04 GMT 10
|
|